Originally Published as: Quoting to Account for Steel Market Volatility

Mill prices have climbed all year and tariff rules keep changing. Metal building manufacturers and dealers are shortening how long they hold a price, and rewriting what a quote promises.

Not long ago, a quote was good for 90 days and everyone counted on it. A customer could shop a bid around, sleep on it, and the number on the page would still be the number at signing. That is getting harder to count on. Steel is one of the most exposed line items in a metal building package, and the exposure comes from two places at once: a domestic market that has climbed steadily for most of 2026, and a tariff regime that has been rewritten several times in under two years.

For manufacturers, dealers and builders, this lands in the estimating department. It shows up on the quote that goes out the door, and in the margin that either survives to closeout or gets eaten by a mill increase that arrived between bid and buyout.

Where Steel Prices Stand Now

The picture as of early October is less a series of wild swings than a long, steady climb. Nucor raised its weekly hot-rolled coil spot price almost every week from late January through June 22, paused, then resumed. Its price reached $1,155 per short ton for the week of August 3, the third consecutive weekly increase, with the company pointing to strong demand and a significant decline in import volumes. By September 8, Steel Market Update’s average hot-rolled coil price stood at $1,225 per short ton, up $20 from the prior week.

For context, one dealer forecast page put prices in the low-to-mid $800s per ton in mid-2025. Comparing the two (different sources and dates) suggests mill prices are on the order of 40 percent higher than roughly a year ago.

Long products are moving too. Gerdau Long Steel North America announced increases of $30 to $80 per short ton on new orders from August 10, and mill lead times for hot-rolled coil were reported at three to five weeks. For quoting, the lesson is that a price held for 60 or 90 days in this market can be stale before the customer decides.

How We Got Here: A Timeline of Section 232

Much of the cost pressure traces to the Section 232 program, which lets the president adjust duties on imports found to threaten national security. The rules have changed repeatedly:

February 10, 2025: Proclamations expanded Section 232 coverage and ended existing exemptions, effective March 12, 2025.

June 4, 2025: Steel and aluminum tariffs doubled to 50 percent for all countries except the United Kingdom, which stayed at 25 percent.

August 2025: After the first inclusions process, Commerce added more than 400 product codes to tariff coverage.

April 6, 2026: A new proclamation applied duties to the full customs value of covered products rather than only their metal content, with tiered rates (50, 25, 15 and 10 percent) depending on the product.

June 8, 2026: A further proclamation set a temporary framework through December 31, 2027. Many Annex I-C products carry a default 25 percent duty; agricultural equipment and certain residential HVAC products moved from 25 to 15 percent; steel racks were added at 25 percent; and the U.S.-melted threshold for the 10 percent preferential rate fell from 95 to 85 percent.

The pattern matters more than any single date. This is an ongoing regulatory process that can change again, and quoting practices need to assume it will.

A Tariff Is a Tax, and the Buyer Pays It

A tariff is a tax. It is collected by U.S. Customs and Border Protection from the importer of record when covered goods enter the country. A foreign government or foreign mill does not pay it. The U.S. company that brings the steel, or the steel-containing product, across the border does.

There are two paths by which that tax reaches a metal building quote.

Directly, on imported material. If a manufacturer or dealer imports coil, panels, trim, fasteners or other covered items, the duty is part of the landed cost. Since April, it is assessed on the full value of covered products, not just the steel inside them.

Indirectly, through domestic prices. Tariffs raise the cost of competing imports and cut import volumes. With less foreign steel competing, domestic mills have room to raise their own prices. The recent run of Nucor increases, reported alongside a significant drop in imports, shows how that works. A buyer who never imports a ton still pays more.

From there the cost moves through the supply chain like any input: mill, service center, fabricator, building package, customer invoice. The Tax Foundation estimates that tariffs overall amount to an average tax increase of about $900 per U.S. household in 2026. That is a figure for all tariffs across the economy, not steel alone, but it illustrates the principle: the buyer carries the cost.

This framing helps when explaining a price change. A tariff-related increase is not a markup and not a penalty paid by a foreign supplier. It is a federal tax that becomes part of the cost of steel before an estimator sees a number. Whether and how it can be passed through on a given job depends on the contract. Tariffs are assessed on imported goods, but a builder may absorb costs, change suppliers, or pass them through only when the contract allows it, and a new tariff alone does not give anyone the right to reprice a signed agreement.

What Volatility Means for Your Quotes

Estimating and sales teams are converging on a similar set of practices.

Shorten validity. Sixty- and 90-day holds are giving way to 15 to 30 days, or to language tying the quote to a specific material purchase date. At least three 2026 industry sources describe this shift.

Add an escalation clause. Tie a defined portion of the price to an objective index, such as the Bureau of Labor Statistics Producer Price Index for steel mill products, so the price moves automatically beyond an agreed threshold instead of forcing a renegotiation.

Lock material early. A deposit that triggers an immediate materials commitment can take the steel portion of a package off the table. The rules should state what is locked, for how long, and what reopens pricing, such as design changes or delivery delays.

Rebuild your contingency. One 2026 analysis recommends 15 to 20 percent earmarked for escalation on material-heavy scopes, in place of a flat 5 percent. Treat that as a data point to test against your own margins, not a standard.

Protect your takeoff. An undercounted takeoff stacks an estimating error on top of a pricing problem.

Put the contract language in order. Spell out who bears tariff changes after signing, and whether the price is fixed, indexed or subject to a surcharge.

On jobs with long delivery schedules, six months or more from bid to delivery, an escalation clause that lets the price adjust past an agreed percentage is increasingly common. Owners and general contractors who once resisted it are more willing to accept it, because the alternative is a contractor who pads every bid enough to survive the worst case.

Photix Studio-stock.Adobe.com

Talking to Customers About Tariff Line Items

Transparency does more for a customer relationship than a padded number. Breaking out a tariff-related allowance or escalation amount as its own line lets customers see what they are paying for. It also gives sales staff a plain answer when a customer asks why a quote is higher than last year’s: steel costs are up because mill prices are up and because tariffs, a federal tax, have raised the cost of steel in the U.S. market, and the quote reflects that.

Steel market volatility is not going away, and neither is the trade policy behind part of it. The manufacturers and dealers who protect margins through 2026 and 2027 will treat quoting as a living process, built on current index data, defined validity windows and honest conversations about where the cost comes from, rather than a single number frozen on the day it was typed.

Information current as of October 7, 2026. Tariff rules and mill prices change frequently; confirm before quoting.


What Changed in 2026

  • April 6: Section 232 duties now apply to the full customs value of covered products, not just metal content.
  • June 8: Temporary adjustments run through December 21, 2027, including a default 25% on many Annex I-C products and 15% on agricultural equipment and some residental HVAC.
  • Mill prices: Nucor raised hot-rolled coil spot prices nearly every week from late January through June 22,
    then resumed in July and August.
  • Lead times: Reported at three to five weeks for hot-rolled coil in August.
  • Quoting: Validity windows are shrinking to 15 to 30 days; escalation clauses and early material commitments are spreading.

Sources